Face Scraper Conveyors C3K

Scraper Face Conveyers C3K 228

PDF

Close

The scraper face conveyer of this construction was developed by our specialists especially for market needs.

The conveyor C3K 228 has smallish sizes and it is destined for seams of thickness more than 0,8 m and especially for use in medium-hard conditions. The troughs are all welded construction with the rolling side profiles. The conveyer capacity is 800 t/h in minimum and the power demand 4x315 kW in maximum. The high abrasive middle board and, especially the "E" profile of the new construction increase the service life up to 3 mil. extracted tons.
 
The conveyer reliability is increasing particularly by reliable trough connection with permissible loading 2 000 kN, with utilization of the special transport chain for especially hard conditions and forged scrapers.
 
This is the basic type which is possible to change according to our customer´s needs.
 
Transport capacity:
800 - 1100 t/h (according to the type)
Moving speed:
0,95 and 1,1 m/s
Total output of motors:
4 x 315/100 kW
Max. conveyer length:
350 m
Service life:
3 mil. tons

Technical parameters of every type are in the PDF leaflet

Scraper Face Conveyer C3K 285/965

PDF

Close

The scraper face conveyer C3K 285/965 was developed for use in seams with medium-hard conditions. The conveyer capacity is 1.700 t/h and the power demand 3x315 kW in maximum. The high abrasive middle board and, especially the "E" profile of the new construction increase the service life up to 5 mil. extracted tons.

 
We recommend use a cast side wall. The conveyer reliability is increasing particularly by reliable trough connection with permissible loading 3 000 kN, with utilization of the special transport chain for especially hard conditions and forged scrapers. This is the basic type which is possible to change according to our customer´s needs.
 
Conveyer leads are in standard type - frontal or lateral. Transition throughs are used according to extaction terms. Gearing frames are produced multi-purpose for all gearboxes according to EU regulations.

Basic technical parameters:

 

Transport capacity:
1 700 t/h
Moving speed:
1,13 m/s
Total output of motors:
3 x 400 kW
Max. conveyer length:
350 m
Service life:
5 mil. tons

Technical parameters of every type are in the PDF leaflet

Scraper Face Conveyer C3K 190/800

PDF

Close

The scraper face conveyer of this construction was developed by our specialists especially for market needs. The conveyor C3K 190/800 has smallish sizes and it is destined for seams of thickness from 0,8 to 1,3 meters - height of the “E” profile is only 190 mm.

 
The conveyer capacity is 700 t/h in minimum. The high abrasive middle board increase the service life up to 2 mil. extracted tons. The conveyer reliability is increasing particularly by reliable trough connection with permissible loading 1 600 kN, with utilization of the special transport chain for especially hard conditions and forged scrapers.
 
This is the basic type which is possible to change according to our customer´s needs.

Basic technical parameters:

Transport capacity:
700 t/h (according to the type)
Moving speed:
1,1 m/s
Total output of motors:
4 x 250/85 kW
Max. conveyer length:
260 m
Service life:
2 mil. tons

Technical parameters of every type are in the PDF leaflet

Scraper Face Conveyer C3K 228/642, 190/642

PDF

Close

The traper face conveyer C3K 228/642, 190/642 were developed by our specialist on the basis of multiyear experience in mining background. And also was developer for shearer of portal type.

 
Construction robustness is provided by using of HARDOX - material resistant to abrasion at central plate and especially at E profile of new construction.
 
Shearer reliability is increased by using of through connection with permissible load 1600kN. Strong chain and forged traper are suitable components for using in difficult condition.

Basic technical parameters:

Transport capacity:
700 - 900 t/h (according to the type)
Moving speed:
0,95 - 1,1 m/s
Total output of motors:
4 x 200/65 or 4 x 250/85 kW
Max. conveyer length:
300 m
Service life:
2 mil. tons

Technical parameters of every type are in the PDF leaflet

Scraper Face Conveyor 260/852

PDF

Close
The Scraper Face Conveyor C3K 260 of this construction was developed by our specialists especially for market needs. The Scraper Face Conveyor C3K 260 has smaller sizes and is designed for seams of  thickness of more than 1,2 m and especially for use in medium-hard conditions. 
The troughs are all welded construction with the rolling side profiles. The conveyor’s minimum capacity is 1200 t/h and the maximum power demand is 4x315 kW. Its construction robustness is provided by using  HARDOX - a material highly resistant to abrasion - for the central plate and especially on the  “E” profile of the new construction.
 
The conveyor reliability is increased particularly by the dependable trough connection with a permissible loading of 2500 kN and the utilisation of the special transport chain for especially hard conditions and forged scrapers.
This is the basic type, which is possible to change according to the customer´s needs.

Technical parameters of every type are in the PDF leaflet

Čelni grabuljasti transporter C3K 228/732 (Bosnia and Herzegovina)

PDF

Close

Technical parameters of every type are in the PDF leaflet