Close

Powered roof supports

Home / Mining products / Longwall systems / Powered roof supports
Photos
Video
fotka 1
fotka 1
fotka 1
fotka 1
fotka 1
fotka 1
fotka 1
Specification
Parameters

Specification

Powered roof supports ensure the mined area, safety of workers at the face and efficient and safe cave control. Mechanically powered supports produced by T Machinery a.s. are designed to withstand high pressures from the overburden and, at the same time, to safely perform the movement of wall conveyor at high stability.

Hydraulic stands and cylinders are produced directly in Ratíškovice. Production supervision allows the customer to provide a warranty for the operation of sections up to 50 000 service cycles. Fitting the stands in the sections of mechanically powered supports by impact valves extend their use to deposits with the danger of mountain shakes.

T Machinery a.s. produces the supports in the ranges for low to medium thickness, but also for the extraction of steep seams or for the extraction of thick seams by the method of discharging the seam bridge from over the ceiling. T Machinery a.s., as one of the few companies, produces shield supports to provide space for lignite mining.

Parameters

  MVPS 800 MVPO 2800 MVPN 3200 MVPO 3200 X MVPO 4200 MVPO 5600  
Max. height 700 700 800 900 2 000 550 750 800 800 mm
Min. height 1 800 2 100 1 900 2 400 3 200 1 600 1 800 1 500 1 900 mm
Max. face gradient along a pillar ±100 ±35 ±25 ±35 ±10 ±35 ±35 ±40 ±25 °
Width 1 160 1 460 1 460 1 460 1 460 1 460 1 460 1 460 1 480 mm
Step 650-800 650-800 650-800 650-800 650-800 650-800 650-800 800 700-800 mm
Number of props per support 2 2 2 2 2 4 4 4 4 pcs
Diameter of prop 160 220 240 220 220 160 160 180   mm
Weight 2 500 7 850 9 100 8 100 12 000 7 800 8 050 8 000 13 770 kg

References

Take a look at the map below - there are points where Powered roof supports have been delivered.

Contact us

Leave your contact

Call us

+420 518 391 526

Contact form

Use the contact form